Cisco SFP-H10GB-CU Compatible Direct Attach Cables 10GBase SFP+ To SFP+
Cisco SFP-H10GB-CU Compatible 10GBase SFP+ to SFP+ Direct Attach Cable
This is a Cisco SFP-H10GB-CU compatible 10GBase SFP+ to SFP+ direct attach cable that operates over passive copper with a maximum reach of 7m. It has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is 100% compliant and functional. The unique EEPROM technique has been used to ensure the DACs are compatible with different brands on the original switches and routers.
Features
• lower cost than SFP+ optical transceiver and active optical cable (AOC)
• Hot-pluggable SFP 20PIN footprint
• I/O Connector designed for high-speed differential signal applications
• Single 3.3V power supply
• Compatible to SFP+ MSA
• Operating temperature range: 0 to 70°C
• RoHS Compliant and Lead-Free
General Product Characteristics
| SFP+ DAC Specifications |
|
| Number of Lanes |
Tx & Rx |
| Channel Data Rate |
10.3125 Gbps |
| Operating Temperature |
0 to + 70°C |
| Storage Temperature |
-40 to + 85°C |
| Supply Voltage |
3.3 V nominal |
| Electrical Interface |
20 pins edge connector |
| Management Interface |
Serial, I2C |
High Speed Characteristics
| Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Notes |
| Differential Impedance |
Zd |
90 |
100 |
110 |
Ω |
|
|
Differential Input Return Loss
|
SDDXX
|
<-12+2* SQRT (f) with f in GHz |
dB |
0.01~4.1GHz |
|
<-6.3+13*
Log10/(f/5.5) with f in GHz
|
dB
|
4.1~11.1GHz
|
| Common Mode Output Return Loss |
SCCXX
|
< -7+1.6*f with f in GHz |
dB |
0.01~2.5GHz |
| |
|
-3 |
dB |
2.5~11.1GHz |
| Difference Waveform Distortion Penalty |
dWDPc |
|
|
6.75 |
dB |
|
| VMA Loss |
L |
|
|
4.4 |
dB |
|
| VMA Loss to Crosstalk Ratio |
VCR |
32.5 |
|
|
dB |
|
Application
• High Capacity I/O in Storage Area Networks, Network Attached Storage, and Storage Servers
• Switched fabric I/O such as ultra-high bandwidth switches and routers
• Data center cabling infrastructure
• High density connections between networking equipment
Description
This SFP+ DAC is passive Direct Attach Copper (DAC) cables as high-speed, cost-effective alternatives to fiber optics in 10G Ethernet applications. The 10G SFP+ DAC contains 2 high-speed copper pairs, operating at data rates of up to 10Gb/s. Each SFP+ port comprises an EEPROM providing product information, which can be read by the host system. Olinkcom's DAC solutions provide power-efficient connectivity for short-distance interconnects. They enable higher port bandwidth, density and configurability at a low cost and reduced power requirement in the data centers. Rigorous cable production testing ensures best out-of-the-box installation experience, performance and durability.
| Compatibility |
| • Cisco 2360-48TD-S |
| • Cisco 3100 WS-CBS3110X-S-I |
| • Cisco 3100 WS-CBS3120X-S |
| • Cisco 3100 WS-CBS3130X-S |
| • Cisco 4500 WS-X4013+10GE |
| • Cisco 4500 WS-X4516-10GE |
| • Cisco 4500 WS-X45-SUP6-E |
| • Cisco 4500 WS-X45-SUP6L-E |
| • Cisco 4500 WS-X45-SUP7-E |
| • Cisco 4500 WS-X45-SUP7L-E |
| • Cisco 4500 WS-X45-SUP8-E |
| • Cisco 4500 WS-X45-SUP8L-E |
| • Cisco 4500 WS-X4606-X2-E |
| • Cisco 4500 WS-X4712-SFP+E |
| • Cisco 4900 ME-4924-10GE |
| • Cisco 4900 WS-C4928-10GE |
| • Cisco 4900 WS-C4948-10GE |
| • Cisco 4900 WS-C4948E |
| • Cisco 5700 AIR-CT5760-100-K9 |
| • Cisco 5700 AIR-CT5760-250-K9 |
| • Cisco 5700 AIR-CT5760-25-K9 |
| • Cisco 5700 AIR-CT5760-50-K9 |
| • Cisco 5700 AIR-CT5760-HA-K9 |
| • Cisco 6000 NC6-60X10GE-L-S |
Product Tags:
|
|
Cisco SFP-H10GB-CU Compatible Direct Attach Cables 10GBase SFP+ To SFP+ Images
|
